Midnite Solar MNPV6

The MNPV6 is a 6-string combiner that can be used for 150 VDC charge controllers and 600 VDC grid tie inverters. It is the most popular PV combiner in North America. It has a gray aluminum NEMA type 3R rainproof enclosure with insulating dead front, and will accept six 150VDC breakers or four 600VDC fuse holders.

The combiner comes without breakers, fuses, or fuse holders. The 15 Amp MNEPV15 breakers, or Wohner fuse holders and KLKD-15 fuses are typically used with this combiner.

Features

• UL/CSA listed for North America
• All aluminum powder coated housing that won’t rust
• Flip up cover that can stay in the open position during installation
• PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
• Chassis ground bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
• Standard din rail to mount up to six 150V, or three 300 Volt breakers, or four 600V fuse holders
• 120 Amp tin plated copper bus bar to combine breaker outputs
• Dead front cover snaps into place after wiring is complete for safety
• Knockouts for PV in and PV out on bottom and sides
• Top surface is available to bring conduit in from directly above the enclosure