Remember Me
Kinetic End Clamp – 30mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC30-M (each)
Kinetic Flashing Kit with four 1/4″ x 2″ self-drilling screws, KFLK-44S (each)
Kinetc Edge Clip with Cable Tie, KCMT-1 (each)
Geocel 2300 Clear-in-Clear, crystal clear tri-polymer roof sealant, tube 10.3 fl. oz., good for 50 years under UV-exposure
Kinetic Mid Clamp – 47 – 50mm BLACK – with K-Nut, bolt, and integrated WEEB, KMWC4750-BM (each)
Kinetic Mid Clamp – 30 – 46mm BLACK – with K-Nut, bolt, and integrated WEEB, KMWC3046-BM (each)
Kinetic KBFGML-GA, fixed ground mount, 40-degree, landscape, 60 & 72 cell modules, galvanized steel
Kinetic KBFGMP-GA, fixed ground mount, 40-degree, portrait, 60 & 72 cell modules, galvanized steel
Kinetic Mid Clamp – 47 – 50mm – with K-Nut, bolt, and integrated bonding washer, KMWC4750-MM (each)
Kinetic Mid Clamp – 30 – 46mm – with K-Nut, bolt, and integrated bonding washer, KMWC3046-MM (each)
Kinetic Rhino Mount, for steel roofs, with self-drilling screws, KHRT25-M (each)
Kinetic KWN60P-G, 60° portrait awning frame for 60- or 72-cell modules, KWN60P-G (each)
Kinetic KAGMM-G, micro-inverter mount for Hat Rail – steel ground mounts (each)
Kinetic KAGMxx-G, adjustable ground Mount, available from 6 through 46 modules, 20-45-60-degree tilt-angle, for 60 & 72 cell modules in portrait, galvanized steel
Kinetic micro-inverter mounting kit, short & long versions, side-of-rail mounted, KHMNx-MA (each)
Kinetic Solar Rapid One Rail, KRAPID1-XX-M (each), from 10’8″ to 21’4″, holds between 3 to 6 solar panels depending on length (in portrait).
Kinetic rail splice/joiner with integrated bonding washers, KJS2-MA (each)
HellermannTyton 151-02189 90-degree stainless edge clip for PV-wires, securely holds 2 wires, pack of 100
Kinetic 4″ steel roof mounting plate, includes stainless lag screws
HellermannTyton 151-01699 stainless edge clip for PV-wires, securely holds 2 wires, pack of 100
HellermannTyton 156-00468 stainless edge clip and 8″ cable tie for solar PV, pack of 100, UV resistant for outdoor use
HellermannTyton PA66UV 12″ cable tie for solar PV, pack of 1000, UV resistant for outdoor use, T50I0UVM4 (article no. 111-00470)
HellermannTyton PA66UV 12″ cable tie for solar PV, pack of 100, UV resistant for outdoor use, T50I0UVC2 (article no. 111-05256)
Copper lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
Aluminum lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
Solartech Universal “Z” bracket (set of 4) for mounting a single solar panel, fits all PV modules
Kinetic Rapid One Rail End cover Plate Black Anodized sold with screw, KRCP-B (each)
Kinetic End Clamp – 32mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each)
Kinetic End Clamp – 32mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each)
Kinetic End Clamp – 35mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-B (each)
Kinetic End Clamp – 38mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-B (each)
Kinetic End Clamp – 40mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
Kinetic End Clamp – 43mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-B (each)
Kinetic End Clamp – 46mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-B (each)
Kinetic End Clamp – 50mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-B (each)
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each)
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each)
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each)
Kinetic Welded Hanger Bolt 4″ Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each)
Kinetic KHSG-M Squirrel Guard, black PVC coated wire mesh 8″ wide, KHSG-M, 100 ft roll
Kinetic KHSG-J stainless steel “J” hook for use with Squirrel Guard, 100 pack, 1 per foot needed
Kinetic End Clamp – 46mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-M (each)
Kinetic End Clamp – 50mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-M (each)
Kinetic 3″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each)
Kinetic 4″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
Kinetic End Clamp – 35mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
Kinetic End Clamp – 38mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-M (each)
Kinetic End Clamp – 40mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
Kinetic End Clamp – 43mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-M (each)
