Remember Me
Fronius 20 year extended warranty for Galvo
Fronius 20 year extended warranty for Primo
Fronius 20 year extended warranty for Symo
Fronius 20 year extended warranty for IG Plus
Custom MC4 extension wire, red or black RPVU (PV-Wire), with or without MC4 connectors on ends, $1.50 per foot & $5 per MC4 connector
Volthium Resistor, 10 Ohm 10 Watt resistor for pre-charging inverter capacitors
Clearance: Enphase ET-CLIP, cable guide clips, needed to fasten Enphase Engage cabling to racking or secure looped cabling (each)
Kinetc Edge Clip with Cable Tie, KCMT-1 (each)
Copper wire 12 AWG RW90, 600V 20A, stranded, black or red, for wet/dry locations (sold per foot)
Copper wire 10 AWG RW90, 600V 30A, stranded, black or red, for wet/dry locations (sold per foot)
Copper wire 8 AWG RW90, 600V 55A, stranded, black & red, for wet/dry locations (sold per foot)
ATO Fuse 1 – 40 Amp, 32V DC, ATO/ATC fuse (automotive type)
Copper wire 6 AWG RW90, 600V 75A, stranded, black or green (ground wire), for wet/dry locations (sold per foot)
Multi-Contact 32.0716 PV-BVK4, sealing cap for MC4 female
Multi-Contact 32.0717 PV-SVK4, sealing cap for MC4 male
QuickCable MAX Lug, tin-plated copper lug, 4 AWG through 4/0 AWG, 3/8″ hole, cUL listed
Kinetic Rapid One Rail End cover Plate Black Anodized sold with screw, KRCP-B (each)
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each)
APsystems AC Connector Unlock Tool, disconnects inverter from trunk cable connector
Aluminum lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
Multi-Contact MC4 male connector for 10 AWG PV-Wire, 32.0143P0001-UR, 1500V, 50A
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each)
Copper wire 4 AWG RW90, 600V 95A, stranded, black, for wet/dry locations (sold per foot)
Multi-Contact MC4 female connector for 10 AWG PV-Wire, 32.0142P0001-UR, 1500V, 50A
Kinetic micro-inverter mounting kit, short & long versions, side-of-rail mounted, KHMNx-MA (each)
Kinetic Mid Clamp – 30 – 46mm – with K-Nut, bolt, and integrated bonding washer, KMWC3046-MM (each)
Kinetic Mid Clamp – 47 – 50mm – with K-Nut, bolt, and integrated bonding washer, KMWC4750-MM (each)
Kinetic 3″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each)
Kinetic End Clamp – 35mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
Kinetic End Clamp – 38mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-M (each)
Kinetic End Clamp – 40mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
Kinetic End Clamp – 43mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-M (each)
Kinetic End Clamp – 46mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-M (each)
Kinetic End Clamp – 32mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each)
Kinetic End Clamp – 50mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-M (each)
2 AWG – 4/0 AWG welding cable, finely stranded copper, 600V, 130A – 260A, black or red (sold per foot)
MidNite Solar MN1/0xBBC-x, busbar cover, long or short, in red, white, green, or black
Dummy product for testing
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each)
Kinetic 4″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
Kinetic Mid Clamp – 30 – 46mm BLACK – with K-Nut, bolt, and integrated WEEB, KMWC3046-BM (each)
Kinetic Mid Clamp – 47 – 50mm BLACK – with K-Nut, bolt, and integrated WEEB, KMWC4750-BM (each)
Clearance: Littelfuse KLKD0XX, midget fuse for use in solar combiners, 600VDC, cUL listed, fits Wohner fuse holder
Flojet 20381-002, quick-connect adapter, quad port to ½” hose barb, straight
Enphase Q-DISC-10, Q Cable disconnect tool
Kinetic Welded Hanger Bolt 4″ Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each)
Kinetic End Clamp – 46mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-B (each)
Kinetic End Clamp – 43mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-B (each)
Kinetic End Clamp – 40mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
Kinetic End Clamp – 38mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-B (each)
Kinetic End Clamp – 35mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-B (each)
Kinetic End Clamp – 32mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each)
Kinetic End Clamp – 50mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-B (each)
Kinetic KAGMM-G, micro-inverter mount for Hat Rail – steel ground mounts (each)
Kinetic Rhino Mount, for steel roofs, with self-drilling screws, KHRT25-M (each)
APsystems AC Bus Y-CONN Cap, water-tight cap, one needed for each unused trunk cable connector
Copper lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
Enphase Q-SEAL-10, Q Cable sealing cap, one needed to cover each unused connector on the cabling
1/0 AWG, 2/0 AWG & 4/0 AWG DLO flexible wire, finely stranded tinned copper, CSA listed, black, 1000 Volt (sold per foot)
QuickCable Flag/L-terminal to automotive post adapter (2-pack)