Remember Me
Fronius 20 year extended warranty for Galvo
Fronius 20 year extended warranty for Primo
Fronius 20 year extended warranty for Symo
Fronius 20 year extended warranty for IG Plus
Custom MC4 extension wire, red or black RPVU (PV-Wire), with or without MC4 connectors on ends, $1.50 per foot & $5 per MC4 connector
Volthium Resistor, 10 Ohm 10 Watt resistor for pre-charging inverter capacitors
Clearance: Enphase ET-CLIP, cable guide clips, needed to fasten Enphase Engage cabling to racking or secure looped cabling (each)
Kinetc Edge Clip with Cable Tie, KCMT-1 (each)
Copper wire 12 AWG RW90, 600V 20A, stranded, black or red, for wet/dry locations (sold per foot)
Copper wire 10 AWG RW90, 600V 30A, stranded, black or red, for wet/dry locations (sold per foot)
Copper wire 8 AWG RW90, 600V 55A, stranded, black & red, for wet/dry locations (sold per foot)
ATO Fuse 1 – 40 Amp, 32V DC, ATO/ATC fuse (automotive type)
Copper wire 6 AWG RW90, 600V 75A, stranded, black or green (ground wire), for wet/dry locations (sold per foot)
Multi-Contact 32.0716 PV-BVK4, sealing cap for MC4 female
Multi-Contact 32.0717 PV-SVK4, sealing cap for MC4 male
QuickCable MAX Lug, tin-plated copper lug, 4 AWG through 4/0 AWG, 3/8″ hole, cUL listed
Kinetic Rapid One Rail End cover Plate Black Anodized sold with screw, KRCP-B (each)
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each)
APsystems AC Connector Unlock Tool, disconnects inverter from trunk cable connector
Aluminum lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
Multi-Contact MC4 male connector for 10 AWG PV-Wire, 32.0143P0001-UR, 1500V, 50A
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each)
Copper wire 4 AWG RW90, 600V 95A, stranded, black, for wet/dry locations (sold per foot)
Multi-Contact MC4 female connector for 10 AWG PV-Wire, 32.0142P0001-UR, 1500V, 50A
Kinetic micro-inverter mounting kit, short & long versions, side-of-rail mounted, KHMNx-MA (each)
Kinetic Mid Clamp – 30 – 46mm – with K-Nut, bolt, and integrated bonding washer, KMWC3046-MM (each)
Kinetic Mid Clamp – 47 – 50mm – with K-Nut, bolt, and integrated bonding washer, KMWC4750-MM (each)
Kinetic 3″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each)
Kinetic End Clamp – 35mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
Kinetic End Clamp – 38mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-M (each)
Kinetic End Clamp – 40mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
Kinetic End Clamp – 43mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-M (each)
Kinetic End Clamp – 46mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-M (each)
Kinetic End Clamp – 32mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each)
Kinetic End Clamp – 50mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-M (each)
2 AWG – 4/0 AWG welding cable, finely stranded copper, 600V, 130A – 260A, black or red (sold per foot)
MidNite Solar MN1/0xBBC-x, busbar cover, long or short, in red, white, green, or black
Dummy product for testing
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each)
Kinetic 4″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
Kinetic Mid Clamp – 30 – 46mm BLACK – with K-Nut, bolt, and integrated WEEB, KMWC3046-BM (each)
Kinetic Mid Clamp – 47 – 50mm BLACK – with K-Nut, bolt, and integrated WEEB, KMWC4750-BM (each)
Clearance: Littelfuse KLKD0XX, midget fuse for use in solar combiners, 600VDC, cUL listed, fits Wohner fuse holder
Flojet 20381-002, quick-connect adapter, quad port to ½” hose barb, straight
Enphase Q-DISC-10, Q Cable disconnect tool
Kinetic Welded Hanger Bolt 4″ Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each)
Kinetic End Clamp – 46mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-B (each)
Kinetic End Clamp – 43mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-B (each)
Kinetic End Clamp – 40mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
Kinetic End Clamp – 38mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-B (each)
Kinetic End Clamp – 35mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-B (each)
Kinetic End Clamp – 32mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each)
Kinetic End Clamp – 50mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-B (each)
Kinetic KAGMM-G, micro-inverter mount for Hat Rail – steel ground mounts (each)
Kinetic Rhino Mount, for steel roofs, with self-drilling screws, KHRT25-M (each)
APsystems AC Bus Y-CONN Cap, water-tight cap, one needed for each unused trunk cable connector
Copper lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
Enphase Q-SEAL-10, Q Cable sealing cap, one needed to cover each unused connector on the cabling
1/0 AWG, 2/0 AWG & 4/0 AWG DLO flexible wire, finely stranded tinned copper, CSA listed, black, 1000 Volt (sold per foot)
QuickCable Flag/L-terminal to automotive post adapter (2-pack)
Midget fuse, 1000V DC rated, 10x38mm, UL & CSA-listed (fits Wohner fuse holder)
Multi-Contact PV-MS, MC4 key for assembling and unlocking MC4 connectors
Littelfuse FHAC0002SXJ, heavy duty inline fuse holder for 1 – 30 Amp ATO (automotive type) fuses, with protective cover
Kinetic rail splice/joiner with integrated bonding washers, KJS2-MA (each)
Victron Battery Indicator Eyelet M8, battery status indicator with 30A ATO fuse, BPC900110014
Victron RJ45 UTP Cable, 0.3m – 30m RJ45 cable for VE.Bus
Kinetic 4″ steel roof mounting plate, includes stainless lag screws
K-Spec heat-shrink tubing, black or red, 4-feet length, thin-wall, 50% shrink ratio
EPSolar – EPEver RTS300R47K3.81A, remote temperature sensor for XTRA, Tracer BN or A charge controllers
Battery interconnect 2 AWG, flexible wire with 3/8″ lugs
Water-Miser 2000, battery recombiner & water-saver vent cap for deep-cycle batteries
Kinetic Flashing Kit with four 1/4″ x 2″ self-drilling screws, KFLK-44S (each)
APsystems AC Bus End Cap, branch terminator end caps, one needed per trunk branch circuit
Multi-Contact 32.0019 PV-AZS4, MC4 Y-connector, (2) male / (1) female, 1500V, 50A
Multi-Contact 32.0018 PV-AZB4, MC4 Y-connector, (1) male / (2) female, 1500V, 50A
Wohner 31110.000, midget fuse holder for DIN rail, 30A, 600 Volt AC or DC maximum, for combiners
SHURflo 255-568-50, twist-on strainer 3/8″ pipe inlet for SHURflo pump
Battery interconnect 1 AWG, flexible wire with 3/8″ lugs
EPSolar – EPEver CC-USB-RS485-150U, communications cable for PC, for XTRA, Tracer BN, or A charge controllers
Enerwatt EWL-LEDG45-2-WW, 2 Watt 12 Volt DC LED bulb, 220 lm, warm white 3000K, 2 bulbs
White clover seed, 500 gram bag, for mixing into a lawn to create a self-fertilizing yard
HellermannTyton PA66UV 12″ cable tie for solar PV, pack of 100, UV resistant for outdoor use, T50I0UVC2 (article no. 111-05256)
MidNite Solar, MNSBBN, non-insulated naked (ground) terminal bus bar, 180A, short version
Battery interconnect 1/0 AWG, flexible wire with 3/8″ lugs
MEGA-fuse 60A – 500A, 32V DC, MEGA bolt-down fuse
Geocel 2300 Clear-in-Clear, crystal clear tri-polymer roof sealant, tube 10.3 fl. oz., good for 50 years under UV-exposure
Fronius plug for final communication, RJ45
Battery interconnect 2/0 AWG, flexible wire with 3/8″ lugs
Enerwatt EWL-LEDA60-4-NWM, 4 Watt 12 Volt DC LED bulb, 440 lm, natural white 4000K, 2 bulbs
Blue Sea MRBF terminal fuse, 40 – 300 Amp, 58 Volt max.